APTRANSCO Recruitment Notification 2017: It is good news for the candidates who want to work in the government sector of Andhra Pradesh. Because the Government of Andhra Pradesh released a recruitment notification for filling up the vacancies of Assistant Engineer in Transmission Corporation of Andhra Pradesh (APTRANSCO). The candidates who completed their B.E/ B. Tech in Civil Engineering and Mechanical Engineering they are eligible for the APTRANCO Recruitment. Interested and eligible candidates can apply for the APTRANSCO Recruitment 2017. Now through our website, we are going to guide you how to apply for the vacancy. Candidates can apply through the official website or can apply directly from the links provided below.The other details like education qualification, age limit, how to apply, pay scale, and selection process is given below. Before going to apply candidates requested to read the instructions carefully and apply for the APTRANSCO.

Andhra Pradesh Transmission Corporation (APTRANSCO) released notification for 146 Assistant Engineer for B. Tech/ B.E in Civil, Electrical Engineering. The candidates who completed their Engineering it is a good opportunity to them to work in the APTRANSCO. Interested candidates can apply on or before the last date of application 12-04-2017.

APTRANSCO Recruitment Vacancies Details

Name of the Organization: APTRANSCO

Name of the Post: Assistant Engineer

Total Number of Vacancies: 146 Posts

Job Location: Andhra Pradesh

Education Qualification: The candidates should possess B.E/ B. Tech in Civil engineering/ Electrical engineering/ Electronics engineering or equivalent degree from a recognized university or institution.

Age Limit:   The candidate age should not be more than 42 years as on 01-03-2017. Age relaxation is applicable as per government rules.

Pay Scale: The selected candidates will get the pay scale of Rs. 41,155- 63,600/-

Important Dates to Remember

Starting date of online application: 20-03-2017

Last Date of online Application: 12-04-2017

Selection Process

  1. The selection of the candidates for appointment will do 100% on written examination.
  2. Only those candidates who qualify in the written examination by being ranked high, community wise will get a call for verification of Original Certificates in 1:1 ratio.

 Application Fee: Candidates should pay Rs 500/- for General and other state and Rs 150/- for BC/ SC/ ST/ and physically candidates through online mode.

How to Apply for the APTRANSCO

  1. Visit the official website or the direct link provided below
  2. Click on the desired post application form will appear
  3. Read the instruction carefully and fill the personal details carefully
  4. Make sure it and click on submit
  5. Take print out for future use

APTRANSCO Hall Ticket/ Admit Card

The APTRANSCO Hall Ticket/ Admit Card available on the official website, seven days before to the date of examination. The candidate has to download the Hall ticket from the website only. Hall tickets will not be sent to the candidates by post.

APTRANSCO Syllabus for Electrical Engineering

Electric Circuits: Network graph, KCL, KVL, node and mesh analysis, star/ delta transformation; electromagnetic induction; mutual induction; AC fundamentals; harmonics, transient response of dc and AC networks; sinusoidal steady-state analysis, resonance, ideal current and voltage sources, The venin’s, Norton’s, Superposition and Maximum Power Transfer theorems, two-port networks, three phase circuits, power measurement .

Electrical Machines: Single phase transformer – equivalent circuit, pharos diagram, tests, regulation and efficiency; three phase transformers – connections, parallel operation; auto-transformer; DC machines – types, windings, generator/ motor characteristics, armature reaction and commutation, starting and speed control of motors; three phase induction motors – principles, types, performance characteristics, starting and speed control; single phase induction motors; synchronous machines – performance, regulation and parallel operation of generators, motor starting, characteristics and applications .

Power Systems: Basic power generation concepts; transmission line models and performance; underground cable, string insulators; corona; distribution systems; per-unit quantities; bus impedance and admittance matrices; load flow; voltage control; power factor correction; economic operation; symmetrical components; fault analysis; principles of over-current, differential and distance protection; protection of alternator, transformer, transmission lines neutral earthing, solid state relays and digital protection; circuit breakers; system stability concepts, swing curves and equal area criterion

Also Read: APGENCO Recruitment 2017 Notification for Civil, Mechanical, Electrical and Electronics Engineer Apply Now

Utilization & Control Systems: Principles of feedback; transfer function; block diagrams; steady-state errors; Routh and Nyquist techniques; Bode plots; root loci; lag, lead and lead-lag compensation; Heating – resistance, induction, dielectric; Welding – spot, seam and butt; Electric traction – speed-time curves, tractive effort;

Measurements: Bridges and potentiometers; PMMC, moving iron, dynamometer and induction type instruments; measurement of voltage, current, power, energy, and power factor; digital voltmeters and multimeters; phase, time and frequency measurement; Q-meters; oscilloscopes;

Analog and Digital Electronics: Characteristics of diodes, BJT, FET; amplifiers – biasing, equivalent circuit and frequency response; oscillators and feedback amplifiers; Combinational and sequential logic circuits; multiplexer; Schmitt trigger; A/D and D/A converters; 8-bit microprocessor basics, architecture, programming, and interfacing.

Power Electronics and Drives: Semiconductor power diodes, transistors, thyristors, tracks, GTOs, MOSFETs, and IGBTs – static characteristics and principles of operation; triggering circuits; phase control rectifiers; bridge converters – fully controlled and half controlled; principles of choppers and inverters; basis concepts of adjustable speed dc and AC drives.

APTRANSCO Syllabus for Civil Engineering

A strength of Materials: Simple stresses and strains. Hook’s law. Stress-strain curve for mild steel, elastic constants, compound bars, temperature stresses, strain energy, resilience, impact loading, SFD and BMD for simply supported, cantilever and over hanging beams. Centre of gravity and moment of inertia, bending and shear stress distributions. Theory of pure torsion, helical spring, thin and thick cylinders, analysis of trusses by method of joints and method of sections, combined direct and bending stresses, column and struts, deflection of beams-double integration, moment area, and conjugate beam methods.

Reinforced Concrete:

Basic reinforcing materials, tests on cement and aggregates. Structural concrete and its grades, workability tests and concrete mix design. Singly and doubly reinforced beams, working stress design of rectangular and flanged beams, shear, bond, development length and torsion in beams, one-way and two-way slabs, axially and eccentrically loaded columns, isolated and combined footings. Basic concepts of limit state design and its applications to the design of beams, slabs, and columns.

Steel Structures: Grades of steels, design of simple and compound beams, riveted and welded joints, riveted and welded connections’-eccentric framed and seated, simple and compound columns, slab and gusseted bases, grillage foundations, roof trusses, plastic analysis – plastic bending of beams, shape factor, plastic analysis theorems, and analysis of fixed, propped cantilever beams by static and kinematics methods.

Fluid Mechanics & Machinery: Fluid properties, pressure measurements, manometers, forces on plane and curved surfaces, the center of pressure, principle of buoyancy, stability of floating and submerged bodies, metacenter, Kinematics of fluid flow, the equation of continuity. Euler’s and Bernoulli’s equations, Impulse-momentum, flow measuring devices – orifices and mouth pieces, notches, and weirs, flow through pipes, open channel flow, the impact of jets – stationery and moving vanes (flat and curved), radial vanes, hydraulic turbines, pumps, and machinery.

Soil Mechanics: Physical properties of soils, classification, and identification, permeability, capillarity, seepage, compaction, shear strength, Earth pressure, slope stability. Foundation Engineering: Stress distribution in soils, bearing capacity, settlement analysis, pile foundation, Coffer-dams, Caissons, Dewatering, Bracing for excavations, site investigations, New mark charts, Machine foundation.

We also Provide  APTRANSCO, Admit Card, Answer Keys and latest information. Stay tuned to the page. For Easy Navigation Press CTRL+D.

Click Here for Online Application

Like Our Official Facebook Page to Get all the Information About Career Recruitment